Figure 11: Attaching The Brackets; Figure 12: Installing The Switch In A Rack - Edge-Core SMCGS26C-Smart Installation Manual

To rack-mount devices:
Attach the brackets to the device using the screws provided in the Bracket
1.
Mounting Kit.

Figure 11: Attaching the Brackets

Mount the device in the rack, using four rack-mounting screws (not
2.
provided). Be sure to secure the lower rack-mounting screws first to
prevent the brackets being bent by the weight of the switch.

Figure 12: Installing the Switch in a Rack

If installing a single switch only, turn to
3.
page 40.
If installing multiple switches, mount them in the rack, one below the other.
4.
C
HAPTER
"Connecting to a Power Source" on
– 38 –
| Installing the Switch
3
Mounting