Table of Contents
Advertisement
Chapter 5: Server Management
Reboot
Rebooting the RaQ XTR can sometimes cure problems with certain services and
is required to recover from RAID failures. The Active Monitor software
recommends when a reboot is necessary.
To reboot the RaQ XTR through your browser:
1.
Select Server Management > Maintenance > Reboot. The "Reboot Cobalt
Server" table appears. See Figure 83.
2. A warning is displayed in the table that rebooting the Cobalt server will
make it unavailable to the network for a few minutes.
Click Reboot. A confirmation dialog verifies the deletion.
3.
Click OK.
You can also reboot the RaQ XTR through its LCD console; refer to "Rebooting"
on page 201.
The reboot process can take a few minutes.
Figure 83 shows the "Reboot Cobalt Server" table.
Figure 83. Reboot Cobalt Server table
168
Cobalt RaQ XTR User Manual
Advertisement
Table of Contents
