Performing Disaster Recovery - Cobalt Digital Inc RaQ XTR User Manual

Appendix F: Disaster Recovery with Third-Party Software

Performing Disaster Recovery

After completing the preparation steps in the previous section, the RaQ XTR is
now ready for disaster recovery. The following instructions may be used to
perform the recovery using the text-based UI on the RaQ XTR itself.
1. Telnet to the RaQ XTR and become the root user.
2. Run the following command:
# /opt/openv/netbackup/bin/bp
3. Select "r" for restore.
4. Select "b" to restore from backup.
5. Select "p" and set the restore path to / .
6. Select "s" to select files and directories. Select the following directories only:
/home
/root
.nsr
/usr
/nsr
/var
/etc
opt
7. Select "i" to initiate the restore.
8. Select "y" to over-write existing files.
9. Select "y" to restore directories.
10. Select "y" to use a progress log.
11. Enter the progress log path:
/var/cobalt/restore.log
12. Wait for the restore to complete.
You may quit from the bp program and monitor progress in the progress log
file, or monitor progress on the NetBackup server.
280 Cobalt RaQ XTR User Manual