Table of Contents
Advertisement
Chapter 5: Server Management
Knox Arkeia
To configure the Knox Arkeia backup and restore solution:
1.
Select Server Management > Backup and Restore > Knox Arkeia. The
"Knox Arkeia Backup Settings" table appears. See Figure 79.
2.
Enter the following information:
•
Enable Client—Click to enable the check box to enable the Knox
Arkeia backup client.
•
Backup Server Name—Enter the fully qualified domain name of the
Knox Arkeia backup server.
•
Port Number—The Knox Arkeia Backup client needs to know the port
number through which to communicate with other hosts using Knox
services including the Knox Arkeia Backup server.
The default port is 617.
Important: Changing this port number is not recommended unless
absolutely necessary. If you change the port number, ensure that
other hosts on the network using Knox services are also configured
to use the port you specify here.
3.
Click Save. The table refreshes and displays the new configuration.
To configure the Knox Arkeia backup server, see Appendix F, "Disaster Recovery
with Third-Party Software".
Figure 79 shows the "Knox Arkeia Backup Settings" table.
Figure 79. Knox Arkeia Backup Settings table
162
Cobalt RaQ XTR User Manual
Advertisement
Table of Contents
