Setting Defaults For A Virtual Site - Cobalt Digital Inc RaQ XTR User Manual

Chapter 5: Server Management

Setting defaults for a virtual site

There are many advantages for setting defaults for the virtual sites. For example,
since multiple sites can share an IP address, a default IP address can be set for all
new virtual sites added. Also, since it is common for many sites to share a
common domain name, it can be desirable to set a default domain name for your
virtual sites.
The same is true for all of the options for a virtual site; it is best for you to decide
the needs of your typical virtual site before assigning these values.
Site defaults and site settings can only be configured by the RaQ XTR
Administrator. If you (as the RaQ XTR Administrator) enable either the
FrontPage Server Extensions service or the Shell Accounts service, the Site
Administrators can enable or disable FrontPage user webs, and enable or disable
individual (per-user) shell access.
Figure 56 shows the screen for configuring the default settings of a virtual site.
Figure 56. Default settings for a virtual site
128 Cobalt RaQ XTR User Manual