Table of Contents
Advertisement
Figure 117. Disconnecting the fans
11. Unfasten the two screws securing the fan assembly (see Figure 118).
Figure 118. Removing the fan assembly
12. Gently tip the upper edge of the fan assembly away from you (towards the
front of the chassis). Then withdraw the assembly from the chassis.
13. Lay the fan assembly on a flat surface with the fans facing downwards. Note
the four plastic release tabs that secure the fans to the fan holder.
14. Release the fan holder's tabs from the frame and withdraw the fan holder
(see Figure 119).
Fan Connections (6)
Fan Assembly Mounting Screws (2)
Fan Assembly
Cobalt RaQ XTR User Manual
Replacing a fan
231
Advertisement
Table of Contents
