Product Features; Packing List - SignaMax 065-1196A User Manual

Product Features

 Complies with IEEE802.3 10BaseT, IEEE802.3u 100BaseTX,
IEEE802.3ab 1000BaseT, and IEEE802.3z 1000BaseSX/LX.
 Supports IEEE802.3x Flow control: Flow control for Full-duplex and Back
pressure for Half-duplex.
 DIP Switch configuration for "Link Fault Signaling".
 Gigabit transmission supports 9K Bytes jumbo frame.
 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation,
Auto-MDI/MDIX.
 Full wire-speed forwarding rate.
 Operating voltage and Max. current consumption: 0.23A @ 12VDC. Power
consumption: 2.76W Max.
 Power Supply: 12VDC external universal PSU.
 32℉ to 122℉ (0℃ to 50℃) operating temperature range.
 Aluminum case.
 Supports Wall Mounting installation or use with media converter chassis
system.
DIP Switch
No. Down
1 Disable Link Fault Signaling
2 Enable Auto-Negotiation for TX port Enable Force mode for TX port
3 TX port Force mode: Full-duplex
4 TX port Force mode: 100Mbps
5 Function reserved
6 Function reserved
<Note>
Power must be cycled off/on after resetting the Link Fault Signaling
function.

Packing List

When you unpack this product package, you will find the
items listed below. Please inspect the contents, and report
any apparent damage or missing items immediately to our
authorized reseller.
 The Media Converter
 User's Manual
 AC to DC Power Adapter
User's Manual
Signamax Gigabit Ethernet Media Converter
Up
Enable Link Fault Signaling
TX port Force mode: Half-duplex
TX port Force mode: 10Mbps
Function reserved
Function reserved
5