Description Of Configuration Parameters In Cfg File; Appendix A - TIPTEL IP 286 Auto Provision Manual

Appendix A

1. Description of configuration parameters in CFG file

Section Header and Path
[ autop_mode ]
path = /config/Setting/autop.cfg
[ PNP ]
path = /config/Setting/autop.cfg
[ cutom_option ]
path = /config/Setting/autop.cfg
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Permitted
Parameters
mode 0,1,4,5,6,7
1 to 43200
schedule_min
0,1,2,3,4,5,
schedule_dayofwee
combinatio
k
n of these
schedule_time
schedule_time_end
Pnp
cutom_option_code
from 129 to
0
cutom_option_type
12
Descriptions
Values
It defines the value of Check New
Config.
0:Disabled
1:Power on
4:Repeatedly
5:Weekly
6:Power on + Repeatedly
7:Power on + Weekly
The default is 0.
It is available when mode is 4 or 6.It
stands for the interval time (by
minutes) of checking new config.
It is available when mode is 5 or 7.It
defines the day of week when there‟s
a need to check new config. If it is
set to be 0123456, it means every
day.
6 or a
0:Sunday
1:Monday
2:Tuesday
numbers
3:Wednesday
4:Thursday
5:Friday
6:Saturday
Time as It is available when mode is 5 or 7.It
19:45 means the phone will check new
config at a time between
schedule_time and
Time as
schedule_time_end on a specified
19:45
day every week.
It defines the value of PNP config.
0 stands for Disabled.
0 or 1
1 stands for Enabled.
The default is 0.
Integer
It defines the Custom Option.
The default is blank.
254
0 or 1 It defines the Custom Option Type..
www.tiptel.nl
Tel: 036 53 666 50
Fax: 036 53 678 81