1336 Bc Almere - TIPTEL IP 286 Auto Provision Manual

[ AutoRedial ]
path = /config/Features/Phone.cfg
[ PoundSend ]
path = /config/Features/Phone.cfg
[ Emergency ]
path = /config/Features/Phone.cfg
[ memory1 ]
path = /config/vpPhone/vpPhone.ini
Tiptel b.v.
Camerastraat 2

1336 BC Almere

404, 480 or
Refuse_Code
DND_On_Code String
DND_Off_Code String
ButtonSoundOn 0 or 1
EnableRedial 0 or 1
Integer
from 1 to
RedialInterval
Integer
RedialTimes from 1 to
0,1 or 2
Enable
Phone
numbers
Num
separated
by commas
type blf or bla
27
404 means 404 (Not Found)
480 means 480 (Temporarily not
available)
486 means 486 (Busy here)
The default is 480.
It defines the value of Return code
when refuse.
404 means 404 (Not Found)
480 means 480 (Temporarily not
486
available)
486 means 486 (Busy here)
The default is 486.
It defines DND On Code.
The default is blank.
It defines DND Off Code.
The default is blank.
It defines whether to enable dialing
tone.
0 stands for Disabled.
1 stands for Enabled.
The default is 1.
It defines whether to enable/disable
Auto redial.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the value of Auto redial
interval.
300 The default is 10 (seconds).
It defines the value of Auto redial
times.
300 The default is 10.
It defines the Key As Send.
0 stands for Disabled.
1 stands for # key.
2 stands for * key.
The default is 1.
It defines the Emergency numbers
separated by commas. For example,
it can be specified
as:911,999,110,120
The default is blank.
It is used when configuring a DSS
Key as BLF or Shared Line.
blf stands for BLF.
www.tiptel.nl
Tel: 036 53 666 50
Fax: 036 53 678 81