Configure The Expansion Module Via Auto Provision - TIPTEL IP 286 Auto Provision Manual

i.

Configure the Expansion Module via Auto Provision

Connect the expansion module to the phone.
Open the .CFG file which you want to use for provision, and edit it as below:
[key0]
Path= /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
Type =
PickupValue =
[key1]
Path= /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
Type =
PickupValue =
Note:
Ext38_00000000000001.cfg means the first expansion module. If you want to configure more than one expansion
module, it will be Ext38_00000000000002.cfg, Ext38_00000000000003.cfg [key0] means the first DSS key on
the expansion module, [key1] means the second DSS key ......
Write the relevant parameter on "DKtype =" "Line = " "Value = " "Type =" "PickupValue = ". For details please see
the manual below.
type
Line
Tiptel b.v.
Camerastraat 2
1336 BC Almere
It is used when configuring a
DSS Key as BLF or Shared
blf or Line.
bla blf stands for BLF.
bla stands for Shared Line.
No default value.
Seen from the web, it reflects the
value under Line title.
Integer
It defines the Line you are going
from 0
to use for a specific function (if
to max
the function needs to specify a
line
line).
number
Normally,0 stands for Auto,1
stands for Line1 and so on.
35
www.tiptel.nl
Tel: 036 53 666 50
Fax: 036 53 678 81