Accessories - DoorKing 6400 Owner's Manual

5.3

Accessories

The following accessory items are available for the model 6400 swing gate operators.
Photo Cell
Loop Detector
Magnetic Lock
Time Clock
Torsion Rods
Hinges
Surge Devices
Gate Scale
Speed Bumps
Solar Panels
Batteries
Fuse
Page 40
Non-contact (photo-cells) sensors for use as a secondary entrapment
protection device.
EMX Industries, Inc., Model IRB-325
MMTC, Inc., Model E3K-R10K4-NR
Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9405-010 - Single channel detector
P/N 9406-010 – Two-channel detector
Magnetic lock provides an excellent means to secure swing gates and is
a fail-safe device allowing emergency vehicle access upon power
outage.
P/N 1216-080 or 1216-081
7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 - 7 day clock P/N 2600-795 - 365 day clock
Torsion rod assembly is used on uphill swing gates for counter balance.
P/N 1203-083
Heavy-duty ball bearing hinges provide easy swing gate operation.
P/N 1200-009 - Two required.
High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage, P/N 1878-010 - Low Voltage
Use to test torque required to move gate. P/N 2600-225
Prefabricated six-foot speed bump reduces traffic speed through gate
system. P/N 1610-150
10 Watt solar panels provide charge to the batteries. Two required.
P/N 2000-075
Replacement batteries, 12 Volt 3 Amp Hour. Two required.
P/N 1801-009
Replacement fuse – 5 Amp
P/N 4601-058