Backing Up, Restoring, And Recovering; Creating Recovery Media And Backups (Select Models Only); Creating Hp Recovery Media (Select Models Only) - HP Pavilion 14 Maintenance And Service Manual

9

Backing up, restoring, and recovering

This chapter provides information about the following processes. The information in the chapter is standard
procedure for most models.
●
Creating recovery media and backups
● Restoring and recovering your system
For additional information, refer to the HP Support Assistant.
From the Start screen, type support, and then select the HP Support Assistant app.
▲
- or -
From the Windows desktop, click the question mark icon in the notification area, at the far right of the
taskbar.

Creating recovery media and backups (select models only)

● Use HP Recovery Manager after you successfully set up the computer, to create HP Recovery media.
This step creates a backup of the HP Recovery partition on the computer. The backup can be used to
reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.
For information on creating recovery media, see
on page
Recovering using HP Recovery Manager (select models only) on page 77
● Use Windows tools to create system restore points and create backups of personal information.

Creating HP Recovery media (select models only)

HP Recovery Manager is a software program that allows you to create recovery media after you successfully
set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes
corrupted. System recovery reinstalls the original operating system and the software programs installed at
the factory and then configures the settings for the programs. HP Recovery media can also be used to
customize the system or restore the factory image if you replace the hard drive.
● Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and keep
them in a safe place.
● HP Recovery Manager examines the computer and determines the required storage capacity for the
blank USB flash drive or the number of blank DVD discs that will be required.
●
To create recovery discs, your computer must have an optical drive with DVD writer capability, and you
must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable
discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE (rewritable Blu-ray) discs; they are not
compatible with HP Recovery Manager software. Or, instead, you can use a high-quality blank USB flash
drive.
● If your computer does not include an integrated optical drive with DVD writer capability, but you would
like to create DVD recovery media, you can use an external optical drive (purchased separately) to
create recovery discs, or you can obtain recovery discs for your computer from support. See the
Worldwide Telephone Numbers booklet included with the computer. You can also find contact
information from the HP website. Go to http://www.hp.com/support, select your country or region, and
75. For information on the recovery options that are available using the recovery media, see
Creating HP Recovery media (select models only)
Creating recovery media and backups (select models only) 75