6.
Gently pull on the right upper corner (1) and lift around the edges of the top cover (2). Lift to remove
the top cover (3).
When replacing the top cover, be sure that the following components are removed from the defective top
cover and installed on the replacement top cover:
●
Power button board and cable (see
●
Touchpad button board (includes cable and buttons), (see
●
USB/audio board (instructions are included in the steps for removing the hard drive; see
on page
44)
Reverse this procedure to install the top cover.
Power button board on page
TouchPad button board on page
47)
Hard drive
Component replacement procedures
49)
43