Power Connector Cable - HP Pavilion 14 Maintenance And Service Manual

Table of Contents

Advertisement

Power connector cable

Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service door (see
b.
Optical drive (see
c.
Memory module (see
d.
WLAN module (see
e.
Keyboard (see
f.
Top cover (see
g.
Hard drive (see
h.
System board (see
Remove the power connector board:
NOTE:
The power connector bracket was disconnected when removing the system board.
1.
Position the system board upside down with the front toward you.
2.
Release the power connector from the clip built into the system board.
Reverse this procedure to install the power connector cable.
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
25), and then remove the following components:
Service door on page
26)
Optical drive on page
32)
Memory module on page
WLAN module on page
Keyboard on page
34)
Top cover on page
41)
Hard drive on page
44)
System board on page
28)
30)
52)
Spare part number
732067-001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents