Removal With Marzocchi And Ohlins 2Nd Series Fork Ohlins; Reassembly With Marzocchi And Ohlins 2Nd Series Fork Ohlins - MOTO GUZZI V11 SPORT MY 2003 Workshop Manual

A
B
C
D
E
F
G
H
I
L
M
N
O
P
Q
R
36
A
B
D
R
EMOVAL WITH
Ö
FORK HLINS
• Place a support under the motorbike so you can lift
the front wheel from the ground;
• Unscrew the screws "A" which fasten the calipers "B"
to the fork struts and detach the calipers from the
brake disks;
• Using the special key, unscrew nut "C" restraining the
wheel spindle;
• Loosen the 4 screws "D" fastening the spindle to the
fork struts;
• Detach spindle "E" and remove the wheel.
For information on overhauling, see chapter 3 in section
F.
R
EASSEMBLY WITH
:
FORK
After having carried out all the necessary tests on the
wheel, reassemble in the following way:
• Insert the complete wheel between the fork struts;
• Lubricate the wheel pin's shaft and threading with
C
recommended grease;
• Bring the spindle flush with the wheel hub;
• Grease the threading and underhead of the locking
nut "C", then tighten it onto the end of the wheel
spindle;
• Tighten the 4 screws "D" to the prescribed torque;
• Tighten the nut "C" to the prescribed tightening torque;
• Check that the disks move freely inside the calipers
and then repeatedly activate the brake lever to restore
the normal position of the caliper pistons.
E
V11 S
R
OSSO
M Ö
ARZOCCHI AND HLINS
M Ö
ARZOCCHI AND HLINS
M 2003 - L M M
PORT Y E ANS Y
C - C S - B
ORSA AFE PORT ALLABIO VARIANTS
2
ND
SERIES
2
ND
SERIES
2003