Table of Contents
Advertisement
! WARNING
Do not operate the snowmobile
unless
headlight
adjusted properly. An incorrectly
adjusted beam will not provide
the
operator
amount of light.
Removing Headlight
Bulb (F-Series/
Jaguar Z1)
NOTE: The bulb portion of
headlight is fragile. HANDLE
WITH CARE. When replacing the
headlight bulb, the bulb assem-
bly must first be removed from
the housing. Do not touch the
glass portion of the bulb. If the
glass is touched, it must be
cleaned with a dry cloth before
installing.
To access the headlight bulbs, use the
following procedure:
1. On the F-Series LXR and Jaguar
Z1 models, release the latches
securing the windshield to the
windshield base; then remove the
windshield.
2. Remove the two torx-head cap
screws located to the outside of
the headlight adjustment knobs;
then remove the single torx-head
cap screw from beneath the con-
sole (located between the head-
lights).
MAINTENANCE
beam
is
the
optimum
3. Remove the cap screw and lock
nut securing the front of the head-
light assembly to the air-intake
silencer.
4. Lift the front of the console
enough to allow the headlight
housing to be removed; then
remove the housing.
5. Remove the bulb from the head-
light housing and disconnect the
wiring harness from the bulb.
741-505A
741-329A
87
Advertisement
Table of Contents
