Detaching And Refitting The Mp Tray Paper Feed Roller - Kyocera FS-2020D Service Manual
Hide thumbs
Also See for FS-2020D:
- Operation manual (219 pages) ,
- Advanced operation manual (212 pages) ,
- Service manual (135 pages)
Table of Contents
Advertisement
2J0/2J1/2J2
(4) Detaching and refitting the MP tray paper feed roller
Procedure
1. Open the MP tray.
2. Grasp and pull the MP tray upwards until it
is removed from the printer.
3. Pull the MP tray paper feed roller holder. (1)
4. Slide the MP tray paper feed roller holder.
(2)
5. Remove the MP tray paper feed roller.
6. Check or replace the MP tray paper feed
roller and refit all the removed parts.
1-5-10
MP tray
MP tray paper feed roller holder
Figure 1-5-12
MP tray paper feed roller
Figure 1-5-13
- Quick Links:
- Parts Names
- Drum Section
Hide quick links:
Advertisement
Table of Contents
