Kyocera FS-2020D Service Manual page 89

7. Draw the rear unit.
8. Remove six screws and then remove the
controller box (main PWB).
9. Remove five screws and then remove the
main PWB from the controller box.
10. Check or replace the main PWB and refit all
the removed parts.
Screw
Screw
Screw
Screw
Screw
Main PWB
Screw
Screw
Controller box
(Main PWB)
Figure 1-5-41
Screw
Controller box
Screw
Figure 1-5-42
2J0/2J1/2J2
Rear unit
Screw
Screw
1-5-31