3Com VCX V7122 Installation Manual page 45

Figure 18 Load an ini File Screen
6 In the Load and ini File screen, you can now choose to either:
Click Browse and navigate to the ini file; the check box Use existing
■
configuration, by default checked, becomes unchecked. Click Send
File; the ini file is loaded to the V7122 and you're notified as to a
successful loading.
Ignore the Browse button (its field remains undefined and the check
■
box Use existing configuration remains checked by default.
Ignore the Browse button and uncheck the User existing configuration
■
check box; no ini file is loaded, the V7122 uses its
factory-preconfigured values.
You can now choose to either:
Click Cancel; the V7122 resets utilizing the cmp, ini and all other
■
configuration files that were previously stored in flash memory. Note
that these are NOT the files you loaded in the previous Wizard steps.
Click Reset; the V7122 resets, utilizing the new cmp and ini file you
■
loaded up to now as well as utilizing the other configuration files.
Click Back; the Load a cmp file screen is reverted to; see
■
Software Upgrade Wizard
Figure
45
16.