V7122 Media Gateways; Onfiguring The; Assigning The V7122 Ip Address - 3Com VCX V7122 Installation Manual

3
Assigning the
V7122 IP Address
C

ONFIGURING THE

G
ATEWAYS
The V7122 gateway is supplied with application software already resident
in flash memory (with factory default 3Com parameters).

Assigning the V7122 IP Address

addresses to the V7122.
Parameters describes how to set up the V7122 with basic parameters
using a standard Web browser (such as Microsoft Internet Explorer).
The V7122 is composed of one or two identical media gateway modules.
These media gateways are fully independent, each gateway having its
own MAC and IP addresses.
To assign an IP address to each of the V7122 modules use one of the
following methods:
HTTP using a Web browser (see
The embedded Command Line Interface (CLI) accessed using Telnet (see
Assigning an IP Address Using the
Table 5 lists the default IP addresses of the V7122. You can use the Reset
button at any time to restore the V7122 networking parameters to their
factory default values (see
Initial State).
V7122 Default Networking Parameters
Table 5
V7122 Version
Single module (up to 8 trunks
Double module (up to 16 trunks)
V7122 M
below describes how to assign IP
Configuring the V7122 Basic Control Protocol
Assigning an IP Address Using
CLI).
Restoring Networking Parameters to their
Default Value
10.1.10.10
10.1.10.10 (Trunks 1-8)
and
10.1.10.11 (Trunks 9-16)
EDIA
HTTP).