3Com VCX V7122 Installation Manual page 42

42 C 7: U
HAPTER PGRADING THE
V7122 M G
EDIA ATEWAYS
To use the Software Upgrade Wizard, perform these steps:
1 Stop all traffic on the V7122 (see the note above).
2 Open the Software Upgrade Wizard (Software Update menu >
Software Upgrade Wizard); the Start Software Upgrade screen
appears.
Figure 15 Start Software Upgrade Screen
At this point, the process can be canceled with no consequence to the
V7122 (click the Cancel button). If you continue the process (by clicking
the Start Software Upgrade button, the process must be followed
through and completed with a V7122 reset at the end. If you click the
Cancel button in any of the subsequent screens, the V7122 is
automatically reset with the configuration that was previously burned in
flash memory.
3 Click the Start Software Upgrade button; the Load a cmp file screen
appears (see Figure 16).