Configuration (Standalone); Auto Programs; Edit Custom Programs; Master/Slave - Chauvet ColorAdo 1-Quad Zoom Tour User Manual

Operation
Configuration
(Standalone)

Auto Programs

Edit Custom
Programs

Master/Slave

Color Settings

-12-
Use standalone configuration to operate the product without a DMX controller.
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to the AUTO main level.
2. Select the desired auto program (AT. 01–10) and speed of the program (P. 000–255) or
custom program (PR. 01–10).
You cannot edit any of the auto programs (AUTO 01–10); however, you can edit the
custom programs (PR.01–10). See
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired custom program (PR. 01–10).
3. Select the desired scene (SC. 01–30).
4. Select the desired color, effect, or timer (RED, GREN, BLUE, WHIT, STRB, ZOOM, TIME,
or FADE).
5. Select the color, effect, or timer value (000–255 for colors, effects, and timers or 00–20 for
strobe).
6. Repeat for the other colors, effects, or timers.
7. Return to the scene (SC. 01–30) level.
8. Repeat the settings of colors, effects, and timers for the other scenes.
The Master/Slave mode allows a group of Colorado™ 1-Quad Zoom Tours (the slaves) to
simultaneously duplicate the output of another Colorado™ 1-Quad Zoom Tour (the master)
without a DMX controller.
1. Set each of the slaves:
a. Go to the RUN main level.
b. Select SLAVE.
2. Set the master:
a. Set the running mode to DMX as explained in
b. Select an auto or custom program as explained in
colors.
·
The master is the one that runs a program whether in Auto, Custom or Static Color
mode.
·
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
·
The master should be the first product in the daisy chain.
The COLOR setting determines how the Colorado™ 1-Quad Zoom Tour generates the white
color based on various RGB settings.
1. Go to the SET main level.
2. Select COLR.
3. Select OFF, RGBW, or UC.
OFF: When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBW: When all the RGB faders are set to 255, the resulting output is defined by
the configured white color (see
UC: When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).

Edit Custom Programs

DMX Control.
Auto
White Calibration).
Colorado™ 1-Quad Zoom Tour User Manual Rev. 1
for details.
Programs, or a static mix of