Mounting; Orientation; Rigging; Procedure - Chauvet ColorAdo 1-Quad Zoom Tour User Manual

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
Colorado™ 1-Quad Zoom Tour User Manual Rev. 1
Before mounting this product, read and follow the
mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our Chauvet line of safety cables, go to http://trusst.com/products/.
The Colorado™ 1-Quad Zoom Tour comes with a double-bracketed yoke to which you can
either attach mounting clamps for hanging or simply use as a floor stand. You must supply your
own mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product. For our Chauvet line of mounting clamps,
go to http://trusst.com/products/.
Floor Mounting
Safety Notes. For our Chauvet line of
for the weight-bearing requirements of this
Mounting Clamp
Overhead Mounting
Setup
Safety Cable
-7-