Undo The Lower Panel; Undo The Door Lock; Undo The Front Panel - Midea G01 Service Manual

5.UNPACKING WAYS OF MAIN PARTS
Operation step
4 Undo the lower panel
①
Open the filter cover,
release the screw on the
lower panel.
②
Turn the washing machine
back at an angle, pinch the
clasp ,and push it out.

5 Undo the door lock

①
Open the door of
washing machine.
②
Take the outer gasket
clamp to the drum.
③
Remove two screws on
the door lock, and take
down the door lock.
④
Take out the door lock
and draw out the plug; pay
attention to the position
of the plug so as not to
connect a wrong circuit
next time.
6 Undo the front plate
①
Undo the door lock
(methods as followed).
②
Remove the lower
cover(methods as
followed).
Picture
P.37