Undo The Gasket; Undo The Pcb Panel - Midea G01 Service Manual

5.UNPACKING WAYS OF MAIN PARTS
Operation step
③ Undo five screws in
the front plate.
④ Put the front plate up
to the clasp of the front
plate away from the
loading holder, and then
take off the front plate.
7Undo the facade
counterweight
①
Undo the front plate
(methods as followed).
②
Remove six screws pull
out the facade
counterweight.

8 Undo the gasket

① Undo the top cover,
control panel, lower cover,
machine door and the front
plate(methods as
followed).
② Remove the outer
gasket clamp between the
door seal and the front
plate.
③ Loosen the inner gasket
clamp between the door
seal and the front of the
outer tub, and take out the
gasket.
Picture
P.38