User Set Mode; Stun Function; Scrambler Function; Automatic Key Lock Function - Icom IC-F5062 Instruction Manual

2
BASIC OPERATION

■ User set mode

The User Set mode allows you to set seldom-changed set-
tings. If the transceiver has [User Set Mode] assigned to it,
you can customize the transceiver operation to suit your pref-
erences and operating style.
Entering the User Set mode
q Hold down [User Set Mode] for 1 second.
• Enters the User Set mode.
w Push [User Set Mode] one or more times to select a de-
sired item.
• The selectable items differ, depending on the presetting.
• The selectable items are Backlight, LCD Contrast, Beep, Beep
Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, Bat-
tery Voltage, Horn, Signal Moni, Lone Worker and System
Info.
e Push [CH Up] or [CH Down] to set the desired level or
condition.
r Hold down [User Set Mode] for 1 second again.
• Exits the User Set mode.

■ Stun function

When the specified ID, set as a kill ID, is received, the stun
function is activated.
When the kill ID is received, the transceiver switches to the
password required condition. Entering of the password is nec-
essary to operate the transceiver again in this case. (p. 8)
12

■ Scrambler function

The voice scrambler function provides private communication
between stations. All versions have a built-in frequency inver-
sion type scrambler; however, an optional rolling or nonrolling
type is available as well.
q Push [Scrambler] to turn the scrambler function ON.
• Displays " ."
w Push [Scrambler] again to turn the scrambler function
OFF.
• Displays " ."

■ Automatic Key Lock function

When [Lock] is assigned to any key and the Automatic Key
Lock timer is pre-programmed* by your dealer, the key lock
function can be automatically turned ON after the specified
time period has passed without operation during Standby
condition.
While the lock function is ON, hold down [Lock] for 1 second
to turn the function OFF.
*When "0" is programmed, this function is not available.