DFI AD77 INFINITY User Manual page 46

2
English
2.4.4 USB 2.0 Drivers
If you are using a USB 2.0 device, you must install the USB 2.0
driver. To install the USB 2.0 driver, please follow the steps below.
1. Click "USB 2.0 Drivers".
To install the USB 2.0 driver, please follow the steps below.
2. Follow the prompts on the screen to complete installation.
3. Restart the system.
2.4.5 Winbond Hardware Monitor
The system board comes with the Hardware Monitor utility
contained in the provided CD. It is capable of monitoring the
system's hardware conditions such as the temperature of the CPU
and system, voltage, and speed of the CPU and system fans. It also
allows you to manually set a range to the items being monitored. If
the values are over or under the set range, a warning message will
pop-up. The utility can also be configured so that a beeping alarm
will sound whenever an error occurs. We recommend that you use
the "Default Setting" which is the ideal setting that would keep the
system in good working condition.
To install Hardware Monitor, please follow the steps below.
1. Click "Winbond Hardware Monitor".
2. Follow the prompts on the screen to complete installation.
3. Restart the system.
46
Note:
Use this utility only in Windows
® ® ® ® ®
Windows ME, Windows
® ® ® ® ®
Windows XP operating system.
® ® ® ® ®
98, Windows
® ® ® ® ®
2000, Windows NT
® ® ® ® ®
98 SE,
® ® ® ® ®
4.0 or