Setting The Alarm Clock - Roberts Revival iStream2 Manual

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio or
a buzzer alarm. In the event of a power interruption your radio has a built in memory
that will retain your alarm settings. Ensure that the time is set correctly before setting
the alarms. Alarms cannot be used when running on batteries as the clock is reset from
internet or DAB broadcast and does not run in battery mode.
Alarms may be set while the radio is in Standby mode or switched on.
1. To change the On / Off states of the alarms while the radio is in Standby or while
switched on, press and release the Alarm button. The display will cycle through
No Alarm, Alarm 1 enabled, Alarm 2 enabled or Alarms 1 and 2 enabled.
2. To change the detailed alarm settings while the radio is in Standby or while
switched on, press and hold the Alarm button. This will cause the Alarms menu to
be displayed. Then skip to step 5 below.
3. Alternatively to change the alarm settings while the radio is switched on using the
menus, press the Menu button to access the menu for the current mode. Rotate
the Tuning/Select control until 'Main menu' is highlighted on the display. Press the
control to enter the 'Main menu'.
4. Rotate the Tuning/Select control until 'Alarms' is selected on the display. Press
the control to see the current alarm settings. If no change is required, press the
Menu or Back buttons to exit.
5. Rotate the Tuning/Select control until the desired alarm (1 or 2) is highlighted on
the display. Press the control to enter alarm setup.
6. Rotate the Tuning/Select control until 'Time' is highlighted on the display. Press
the control to adjust the alarm time.
7. Rotate the Tuning/Select control to choose the alarm hour. Press the control to
confi rm the setting.
8. Rotate the Tuning/Select control to choose the alarm minute. Press the control to
confi rm the setting. The display will then return to the alarm setting menu.
If the radio has been set to use a 12 hour clock format, there will also be an option
here for setting AM or PM for the alarm time.
Clock and Alarms
1,2
3,4
3-8
76