Before You Can Use This Product - Roberts Revival iStream2 Manual

Before you can use this product

Before you can use your internet radio, you must have the following:
● A broadband Internet connection (not required for DAB, FM or Music
Player functions).
● A wireless access point (WiFi) connected to your broadband Internet
Service Provider, preferably via a router. In many cases the broadband
modem, router and wireless access point will be a single combined unit
supplied by your Internet Service Provider or bought from a computer
store.
● If your wireless network requires a security password to allow
connection, then you either need to know the WEP, WPA or WPA2
key used for encryption so that you can get the radio to communicate
with the network, or your router needs to offer WiFi Protected Setup
(WPS).
The radio is compatible with 802.11b, g, or n networks and can use 2.4GHz
or 5GHz WiFi frequency bands.
The radio will typically work within a 10-20 metre radius from your wireless
access point. The actual range achieved will depend upon the building
type, other nearby wireless networks, and possible interference sources.
DAB and FM radio functions can operate wherever the radio is able to
receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your wireless access
point or router is powered up and working with your broadband Internet
service (use your computer to verify this). To get this part of the system
working you must read the instructions supplied with the wireless access
point or router.
3