Sleep Timer - Roberts Revival iStream2 Manual

Sleep timer

Your radio can be set to turn off after a preset time has elapsed. The sleep
timer setting can be adjusted between 15 and 120 minutes in 15 minute
increments. (See also the section Inactive Standby on page 86.)
1. Press and release the On/Off control to switch on your radio.
2. Access the menu for the current mode by pressing the Menu button.
Rotate the Tuning/Select control until 'Main menu' is highlighted on
the display. Press the control to enter the 'Main menu'.
3. Rotate the Tuning/Select control until 'Sleep' is highlighted on the
display then press the Tuning/Select control.
4. Rotate the Tuning/Select control until the required sleep time setting
is selected. Press the Tuning/Select control to confi rm the setting.
The sleep timer can be set to between 15 and 120 minutes, or to Off.
5. Your radio will switch into Standby mode after the preset time has
elapsed. If running on batteries it will switch off completely shortly
afterwards.
An active sleep timer is shown using a small timer indicator at the
bottom of the playing displays. This indicator also shows the sleep
time remaining before the radio switches itself into Standby mode.
6. To cancel the sleep time before the preset time has elapsed and to
turn off the radio, press and release the On/Off button to turn the radio
off manually.
To cancel the sleep timer and leave the radio playing, go back into
the sleep timer settings (steps 1 to 4 above) and select the Off option
in step 4.
Clock and Alarms
Music player
DAB
FM
AUX in
1,6
Sleep
2
2-4
80