Presetting Stations In Dab And Fm Modes - Roberts Revival iStream2 Manual

Presetting stations in DAB and FM modes

There are 10 memory presets each for DAB and FM radio. They are used
in the same way for each operating mode.
Storing a preset
1. Press and release the On/Off control to switch on your radio. Tune
to the required station using one of the methods described on the
preceding pages.
2. Press and hold the Preset button. The display will show a 'Save to
Preset' menu.
3. Use the Tuning/Select control to scroll through the preset list until you
reach an unused preset or a preset that you wish to change. Press and
release the control to store the preset. 'Preset stored' will be shown on
the display. Repeat this procedure as needed for the remaining presets.
4. Stations which are already stored in the presets may be over-written
by following the procedure above.
Note: The radio station presets are retained in the memory when the
radio is switched off.
Recalling a preset
1. Select the DAB or FM mode using the Mode button.
2. Press and release the Preset button to display the 'Recall from Preset'
menu. Use the Tuning/Select control to select the desired preset
station. Press and release the Tuning/Select control. Your radio will
then tune to the station stored in the preset memory. The preset used
will be shown at the bottom of the display screen. e.g. 'P2'.
71
2
1-4
1
2
2