Roberts Revival iStream2 Manual page 52

6. Windows will then open a 'Play to' window showing the track or tracks
to be played. Your computer will then take control of your radio. Your
radio will enter the Digital Media Renderer mode (DMR) and after a few
seconds the radio will start playing. The display on the radio will show
that is it in DMR mode.
7. While the radio is playing in DMR mode you can use the controls in the
'Play to' window on your computer to skip tracks, fast-forward or rewind,
to pause or restart, and to change the volume on the radio.
You may also use the controls on your radio to adjust volume, display
track information (press the Info button) or to change operating mode. It
is not possible to skip tracks or pause playback using the radio's controls
while it is in DMR mode.
8. While playing, you may select additional content within Windows and
again use the 'Play to' function (see steps 3 – 5). The additional tracks
will be added to the playlist in the current 'Play to' window. You may also
delete or change the order of tracks within the 'Play to' window.
9. When you wish to exit DMR mode, simply either switch off your radio
or press the mode button to select a different operating mode.
Don't forget that in order to reselect the DMR mode and to be able to use
'Play to' from Windows you must fi rst ensure that your radio has an active
connection to your network (see steps 1 and 2 above).
Note: Some Windows security software can prevent correct operation of
the 'Play to' function. Such software may have updates or confi guration
options which will permit 'Play to' to operate correctly - please consult your
anti-virus software supplier. The 'Play to' function in Windows 7 and 8 has
been tested successfully with the iStream 2 radio when using Microsoft's
own security software without problems (Microsoft Security Essentials for
Windows 7, Windows Defender for Windows 8 / 8.1).
51