Clock And Time Settings - Roberts Revival iStream2 Manual

Clock and time settings

The following instructions assume that you have either just plugged in your
radio (see page 10) or that you have just specifi ed the language option
for the menus (see page 11).
1. Rotate the Tuning/Select control to highlight the desired clock format
(either 12 or 24 hour) then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu
allowing you to specify the auto-update option for the clock will be
shown. The 'Update from Network' option will be best for most users.
3. Rotate the Tuning/Select control to choose an auto-update option for
the clock. This can be updated from DAB or FM radio, from the Network,
or not updated. The default is to auto-update from the network. If you
choose another option go to 'Connecting to your computer network'
on page 13. Otherwise you will fi rst need to select the correct time
zone and daylight savings setting, see the next steps. If you choose
'No update' you will need to set the clock manually later, see page 74.
Press the control to confi rm your choice.
4. Rotate the Tuning/Select control to highlight the time zone for your
current location. Press the Tuning/Select control to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or
BST/GMT adjustment).
Rotate the Tuning/Select control to highlight 'ON' or 'OFF' as required.
The asterisk shows the current setting.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is
equivalent to Greenwich Mean Time.
6. Continue setting up your radio on the next page.
Confi guration
1-5
12