Table of Contents
Advertisement
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
•
Always ensure that the tool has stopped before connecting it to the air
supply.
•
Do not wear watches, rings, bracelets, or loose clothing when using any air
tool.
•
Do not overload the tool. Allow the tool to operate at its optimum speed for
maximum efficiency.
•
Do not use a tool that is leaking air, with missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
•
For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
•
Always keep your air tool clean and lubricated. Daily lubrication is essential
to avoid internal corrosion and possible failures.
•
Ensure the floor is not slippery and wear non-slip shoes. Floor should be
kept clean and clear.
•
Always follow all workshop safety rules, regulations, and conditions when
using the Air-powered Clipped-Head Framing Nailer.
•
Carry the tool by the handle only, keeping the finger away from the trigger.
Do not carry the tool by the hose, magazine or any other parts.
•
Do not use the tool near or below the freezing condition, as doing so may
cause tool failure.
•
Do not store the tool in a freezing environment to prevent ice formation on
the operating valves of the tool, as doing so may cause tool failure.
•
Handling and storage of oil: Use with adequate ventilation. Avoid contact of
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a
tightly closed container in a cool, dry, well-ventilated area free from
incompatible substances.
AIR-POWERED CLIPPED-HEAD FRAMING NAILER 058-8434-4
8
Hide quick links:
Advertisement
Table of Contents
