7
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Do not allow unskilled or untrained individuals to operate the Air-powered
Clipped-Head Framing Nailer.
•
Do not use the Air-powered Clipped-Head Framing Nailer for any task other
than that it is designed to perform.
•
Do not use the Air-powered Clipped-Head Framing Nailer unless it has been
instructed to use.
•
Locate the compressor in a well-ventilated area for cooling, at a minimum of
12" (31 cm) away from the nearest wall.
•
Protect the air hose and the power cord from damage and puncture. Inspect
them for weak or worn spots every week, and replace them if necessary.
•
Always wear hearing protection when using the air compressor. Failure to do
so may result in hearing loss.
•
Do not carry the compressor while it is running.
•
Do not operate the compressor if it is not in a stable position.
•
Do not operate the compressor on a rooftop or an elevated position that
could allow the unit to fall or be tipped over.
•
Always replace a damaged gauge before operating the unit again.
AIR-POWERED CLIPPED-HEAD FRAMING NAILER 058-8434-4