Ricoh sp 6430dn Manual page 71

Message
"No response from server."
"Paper Size Error"
"Paper Type Error"
"Password mismatch."
"PDF File Error."
"Print overrun."
"Receiving data failed."
"Sending data failed."
"User auth. already exists."
Cause
A timeout occurred while the
printer was connecting to the
server for LDAP Authentication
or Windows Authentication.
Printing was canceled because
the specified paper size cannot
be fed from the tray.
The printer does not recognize
the paper type specified using
the printer driver.
A wrong password was entered
when an encrypted PDF file was
printed.
A syntax error, etc., occurred.
Printing images was aborted.
Data reception was aborted.
The printer received a command
to stop a transmission from the
printer driver.
The same account name is
already used in the newly
selected domain or server in an
environment using LDAP
Authentication or Integration
Server Authentication.
When Messages Are Displayed
Solution
Check the status of the server.
Check the available paper size.
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, check the user
paper type settings of the
printer.
Check the password.
Check that the PDF file is valid.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
Resend the data.
Check that the computer is
working correctly.
Contact your user administrator.
69