Ricoh sp 6430dn Manual page 68

3. Troubleshooting
Message
"Address book is in use."
"Auto-user prog. failed."
"Cannot print."
"Classification Code Error"
"Collate cancelled."
"Collate: Page max."
"Command Error."
"Compressed Data Error"
"Duplex cancelled."
66
Cause
The printer currently cannot
perform authentication because
the Address Book is being used
by another function.
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
You have no privileges to print
the PDF file you want to print.
The classification code is not
specified with the printer driver.
Collate was canceled.
The amount of free memory is
insufficient to perform collating.
An RPCS command error
occurred.
The printer detected corrupt
compressed data.
Duplex printing was canceled.
Solution
Wait a while, and then retry the
operation.
For details about the automatic
registration of user information,
see Security Guide.
Contact the owner of the
document.
Select [Optional] for the
classification code. For details
about how to specify
classification code settings, see
"Registering Classification
Codes", Operating Instructions.
Turn the printer off, and then
turn it on again. If the message
appears again, contact your
service representative.
Reduce the number of pages to
be printed or install the optional
SDRAM.
Check that the communication
between a device and the
printer is working correctly.
Check that the program you
used to compress the data is
functioning correctly.
Change the setting for "Duplex
Tray" in [Paper Input] to enable
duplex printing for the paper
tray.