Grounding Instructions; Emergency Stop Procedure - Bowflex TreadClimber TC20 Assembly & Owners Manual

Grounding Instructions

This product must be electrically grounded. If a malfunction occurs, correct grounding decreases the risk of electric shock. The power cord is
equipped with an equipment-grounding conductor, and must be connected to an outlet that is properly installed and grounded.
The electrical wiring must comply with all applicable local and provincial standards and requirements. Incorrect connection of the
equipment-grounding conductor can result in a risk of electric shock. Consult a licensed electrician if you are not sure that the
machine is correctly grounded. Do not change the plug on the machine – if it does not fit the outlet, have a correct outlet installed
by a licensed electrician.
If you connect the machine to an outlet with GFI (ground fault interrupt) or AFI (arc fault interrupt), machine operation can cause the circuit to trip. A
Surge Protector Device is recommended to protect the machine.
If a Surge Protector Device (SPD) is used with this machine, be sure that it is UL1449 rated or equivalent, and matches the power rating of
this equipment (220-240V AC). Do not connect other appliances or devices to the surge protector in combination with this machine
Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
Emergency Stop Procedure ( Safety Key Port )
The TreadClimber machine is equipped with a Safety Key that can prevent serious injury, as well as prevent children from playing with and/or being
®
injured on the machine. If the Safety Key is not correctly inserted into the Safety Key Port, the belts will not operate.
Always attach the Safety Key Clip to your clothing during your workout.
When you use the machine, only remove the Safety Key in an
emergency. When the key is removed while the machine is in operation,
it will stop quickly, which could cause the loss of balance and possible
injury.
For safe storage of the machine and to prevent unsupervised operation
of the machine always remove the Safety Key and disconnect the
power cord from the wall outlet and the AC input. Place the power cord
in a secure location.
The Console will display "EStP" for a Safety Key fault. The TreadClimber
machine will pause a workout when the Safety Key is removed. Inspect the
Safety Key and be sure it is connected to the Console correctly. Push the
START button to resume the workout.
®
5
Assembly / Owner's Manual