Bowflex TreadClimber TC20 Assembly & Owners Manual page 17

8. Connect the I/O Cable to the Console I/O Cable
Note: Do not crimp the I/O Cable.
9. Attach the Console/Handlebar/Upright Assembly to the Base Assembly
Note: Do not crimp the I/O Cables. This step may require two people. Do not fully tighten until all hardware has been installed.
In order to avoid possible serious injury, when inserting the tube ends into the Base Assembly be careful to avoid fingers or hands being
caught or pinched. Be sure the excess length of the I/O Cable goes into the Upright and does not get crimped.
X10
D
B
A
5 mm
Assembly / Owner's Manual
17