Bowflex TreadClimber TC20 Assembly & Owners Manual page 42

Results
When a workout ends, the Console will show your workout results. They are shown in sequence (time, distance, calories, average heart rate, and aver-
age speed) three times.
Console Service / Setup Mode
The Console has a Service / Setup Mode. Some options in the Service / Setup Mode can be adjusted to your preferences, but most are helpful for
service of the machine. To access the Service / Setup Mode, hold down the Increase and Decrease buttons for 2 seconds when in Idle Mode.
Order Display Option
1 Unit Units
2 brt Brightness
3 LOG Error Log *
4 Con Console Version *
5 dr Drive Version *
6 HrS Total Hours
7 diSt Total Distance
8 HiSt Motor Current History *
9 Hd Hardware Type *
10 Curr Motor Current *
11 CoAS Coast Time *
12 LOOP Loop Back *
13 Str Set Time Reference
14 CSn Console Serial Number*
15 dSn Drive Serial Number *
16 dES Drive Error Statistics *
17 Prog Program Drive *
18 USb Write System Log *
* for Service Technicians
Use the Increase and Decrease buttons to cycle through the Options. To change the value of an Option, push START and use the Increase and
Decrease buttons to select the new value. Push START to assign the new value to the Option.
Push STOP to exit an Option and the Service / Setup Mode.
Description
Select your preferred unit of measurement; "Lb" = English Imperial, "SI" = metric
Control the brightness level of the Console; "20" = maximum intensity, "1" = minimum
Displays error codes, starting with the most recent
Displays the Console software version
Displays the drive software version
Displays total number of hours and minutes used
Displays total distance
Displays the average motor current for the current maintenance interval. Push the Decrease
button to view the averages of previous intervals.
Displays the hardware type
Displays the current of the motor
Tests to see how fast the the belts stop
Test to see if the Console is receiving data
Sets the current day and time as the start of the workout week for all users
Displays the serial number for the Console
Displays the serial number for the Motor Control Board
Displays the hard fault statistics experienced by the Console
Updates the program of the USB Drive
Saves the system log to an attached USB Drive
42
Assembly / Owner's Manual