Grounding Instructions; Emergency Stop Procedure - Bowflex TREADCLIMBER TC200 Assembly & Owners Manual

Grounding Instructions

This product must be electrically grounded. If a malfunction occurs, correct grounding decreases the risk of electric shock. The power cord is
equipped with an equipment-grounding conductor, and must be connected to an outlet that is properly installed and grounded.
Safety Warning Labels and Serial Number
The electrical wiring must comply with all applicable local and provincial standards and requirements. Incorrect
connection of the equipment-grounding conductor can result in a risk of electric shock. Consult a licensed electrician if
you are not sure that the machine is correctly grounded. Do not change the plug on the machine – if it does not fit the
outlet, have a correct outlet installed by a licensed electrician.
If you connect the machine to an outlet with GFI (ground fault interrupt) or AFCI (arc fault circuit interrupt), machine operation can cause the circuit to
trip.
If an extension cord or surge protector is used with this machine, make sure that it is a heavy duty model rated at 15A operation,
and accepts an equipment-grounding conductor. Do not connect other appliances or devices to the extension cord or surge
protector in combination with this machine.
This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug illustrated below. Make sure
that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
Emergency Stop Procedure ( Safety Key Port )
The TreadClimber machine is equipped with a Safety Key that can
®
prevent serious injury, unsupervised operation, as well as prevent
children from playing with and/or being injured on the machine. If the
Safety Key is removed or not correctly inserted into the Safety Key Port,
the belts will not operate.
Always attach the Safety Key Clip to your clothing during
your workout.
When you use the machine, only remove the Safety Key in an
emergency. When the key is removed while the machine is in
operation, it will stop quickly, which could cause the loss of
balance and possible injury.
For safe storage of the machine and to prevent unsupervised
operation of the machine always remove the Safety Key and
disconnect the power cord from the wall outlet and machine
AC input. Place the power cord in a secure location.
The Console will display "INSERT SAFETY KEY" when the Safety Key is not attached. The TreadClimber
when the Safety Key is removed.
Grounded
Outlet
Grounding Pin
Assembly / Owner's Manual
Grounded
Outlet Box
7
machine will end a workout program
®