Key Click Tone; Screen Saver - Panasonic KX-UTG300 Operating Instructions Manual

Customizing the Telephone

Key Click Tone

Setting
Key Click Tone
ECO Mode
Setting
ECO Mode
Note
•
When ECO mode is enabled, the Speed/Duplex setting (Page 55) for LAN Port and PC Port changes
as follows:
–
Speed/Duplex: "10M-Full"
–
PC port cannot be used.
•
When the ECO mode setting is changed, the unit will restart.
•
When ECO mode is enabled,

Screen Saver

Setting
Wait Time (0-10min)
Bluetooth
Setting
Enable Bluetooth
USB
Setting
Recording
Export Call Log
Export Log
50 Operating Instructions
Description
Select the volume of the tone that is
heard in response to key presses.
Description
Enabling this mode reduces the
amount of electricity consumed by
the unit.
is displayed in the status bar at the top of the screen.
Description
Period of idle time (in minutes) before
the screen saver is displayed.
Description
Enable or disable Bluetooth for use
with Bluetooth devices.
Description
Play back recorded calls.
Export a call log to a USB flash drive.
Export the console log (this contains
the same information as the log
exported from Log Dump in Web user
interface programming) to a USB
flash drive.
Value Range
High, Middle, Low,
Off
Value Range
On, Off
Value Range
0-10
Value Range
On, Off
Value Range
—
—
—
Document Version 2014-11
Default
Off
Default
Off
Default
0
Default
Off
Default
—
—
—