Panasonic KX-UTG300 Operating Instructions Manual page 67

When connecting the Ethernet cable
•
Connect the cables as shown in the following illustration.
Ethernet cable
•
Use the included Ethernet cable.
When connecting to a switching hub
•
If PoE is available, an AC adaptor is not needed. An AC adaptor must be used when the KX-UTA336
Add-on key module is installed to the unit.
•
This unit complies with the PoE Class 2 standard.
When connecting a PC
•
Only a PC can be connected to the PC port. Other SIP phones, or network devices such as routers
or switching hubs, cannot be connected.
•
The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
•
Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the
connectors.
When registering a Bluetooth headset
•
One Bluetooth headset can be registered to this unit. For details, see "Connecting the Bluetooth
headset (Page 76)".
Document Version 2014-11
Incorrect Correct
Ethernet cable
Installation and Setup
60 mm (2 3 / in)
8
or less
Operating Instructions 67