Maintaining The Unit; Resetting The Unit; Restarting The Unit; Cleaning The Unit - Panasonic KX-UTG300 Operating Instructions Manual

Installation and Setup

Maintaining the Unit

Resetting the Unit

Resetting all settings except for private
settings
Executing "Exclude Private Settings" resets all settings
except for private settings. Private settings include
ringtone volume, brightness, phonebook, and call
history.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Reset", and then press
[ENTER].
3.
Press [ ] or [ ] to select "Exclude Private
Settings", and then press [ENTER].
4.
Touch .
Yes
•
To cancel, touch
Resetting all settings except for network
settings
Executing "Exclude Network Settings" resets all
settings except for network settings. Private settings
and Bluetooth settings are reset in this case. Network
settings include IPv4, IPv6, LLDP Settings, CDP
Settings, VLAN Settings, Speed/Duplex, and Port
Mirroring.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Reset", and then press
[ENTER].
3.
Press [ ] or [ ] to select "Exclude Network
Settings", and then press [ENTER].
4.
Touch .
Yes
•
To cancel, touch

Restarting the Unit

When some of the settings on the unit have been
changed via Web user interface programming or
configuration file programming, the unit must be
restarted.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Restart", and then press
[ENTER].
3.
Touch .
Yes
•
To cancel, touch
78 Operating Instructions
.
.
No
.
.
No
.
.
No

Cleaning the Unit

Clean the unit periodically by wiping it with a soft and
dry cloth.
When cleaning the unit, observe the following
precautions.
When cleaning the display
•
Wipe the display with only the following types of
materials:
–
A soft and dry cloth.
–
A soft cloth with a very small quantity of neutral
detergent or ethyl alcohol.
•
Do not press or rub the display with too much force.
•
You can disable the touch screen to prevent
accidental operation of the unit during cleaning.
To disable the touch screen
1.
On the Home screen, select
2.
Press [#][6][1][1].
3.
Touch
Yes
To enable the touch screen
1.
On the Home screen, select
2.
Press [#][6][1][1].
•
"Touch screen enabled!" is displayed.
When cleaning the body
•
To avoid damaging the unit, disconnect the
Ethernet cable and all other cables from the unit
before cleaning. If the unit is powered with an AC
adaptor, disconnect the AC adaptor from the unit
and power outlet before cleaning.
•
If the unit becomes particularly dirty, apply a light
kitchen cleanser to a soft cloth, wring the cloth
thoroughly, and then wipe the unit. When finished,
dry the unit with a soft and dry cloth.
•
To avoid damage or discoloration, do not clean the
unit with any of the following materials or with
cleaners that contain any of the following materials:
.
.
.
Document Version 2014-11