Screen Saver; Importing Screen Saver Images; Adjusting The Screen Saver Wait Time - Panasonic KX-UTG300 Operating Instructions Manual

Screen Saver

The screen saver is an image or a series of images that
are displayed after a specified wait time. The following
is the default screen saver.
Note
•
The default image will be displayed if the date
and time are not configured and an image has
not been imported.
•
The date and time will be displayed if the date
and time are configured but an image has not
been imported.
•
The imported image will be displayed if an
image has been imported. The imported image
will be displayed regardless of whether the date
and time has been configured or not.

Importing Screen Saver Images

If you have a USB flash drive, you can change the
screen saver by importing your own images.
1.
Connect a USB flash drive to the USB port.
•
"The Mass storage device is now connected" is
displayed and
2.
On the Home screen, select
3.
Press [ ] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
4.
Press [ ] or [ ] to select "USB", and then press
[ENTER].
5.
Press [ ] or [ ] to select "Import Screen Saver
Pictures", and then touch
Document Version 2014-11
is displayed on the upper left.
.
.
Import
Note
•
You can also change the screen saver by
importing images using Web user interface
programming. For more information, consult
your administrator or dealer.
•
Up to 5 images can be imported. If more than 1
image is imported, the screen saver image
changes every 3 seconds.
•
The images must be in the PNG file format,
have a size of 800 ´ 480 pixels, and be saved
in the following folder path:
\ScreenSaver\
•
The images must be named "pictureN.png",
where N is any number from 1 to 5.
•
Any existing images in the unit will be
overwritten automatically when importing new
images.
•
Only 1 USB flash drive can be connected to the
unit.
•
Only USB flash drives with a capacity of up to
32 GB are supported.
Adjusting the Screen Saver Wait
Time
You can adjust the period of idle time before the screen
saver is displayed.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
3.
Press [ ] or [ ] to select "Screen Saver", and then
press [ENTER].
4.
Press [ENTER], and then enter the wait time in
minutes.
•
To disable the screen saver, enter "0".
5.
Touch .
Save
Customizing the Telephone
.
Operating Instructions 61