Redialing The Last Number You Dialed (Redial, Last Number); One-Touch Dialing; Intercom; Multicast Paging (Push To Talk) - Panasonic KX-UTG300 Operating Instructions Manual

Feature Operations
Editing a phone number before
dialing from the call log
You can edit a phone number in the incoming or missed
call log before using it to dial.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select the log type, and then press
[ENTER].
3.
Press [ ] or [ ] to select the desired entry.
4.
Touch .
Edit Dial
5.
Edit the number, and then go off-hook.
6.
To end the call, go on-hook.
Redialing the Last Number You
Dialed (Redial, Last Number)
You can redial the last phone number that you dialed.
1.
Go off-hook.
2.
Press [REDIAL].
3.
To end the call, go on-hook.
Note
•
To select a line to use to redial, touch the
appropriate line button before you press
[REDIAL]. For details about line buttons, see
"Flexible Buttons (Page 33)".
You can also select a line by pressing [ ] or
[ ].

One-touch Dialing

You can make a call with a One-touch operation if a
One-touch Dialing button has been created for the
desired party. One-touch Dialing buttons can also be
configured to access features of your phone system, if
available.
1.
On the Home screen, select
2.
Touch the One-touch Dialing button.
3.
To end the call, go on-hook.
Note
•
A BLF (Busy Lamp Field) button can also be
used to call an extension simply by touching the
button. For details, consult your administrator or
dealer.
•
For details about flexible buttons such as
One-touch Dialing buttons and BLF buttons,
see "Flexible Buttons (Page 33)".
22 Operating Instructions

Intercom

If the SIP server supports the Intercom feature, you can
use it to make intercom announcements to other
phones. For details, consult your administrator or
. dealer.

Multicast Paging (Push To Talk)

Multicast paging enables you to send a one-way
announcement to a preconfigured page group. To use
multicast paging, the Enable Multicast Paging setting
must be enabled through Web user interface
programming (Page 62). For details, consult your
administrator or dealer.
Sending multicast paging announcements
1.
2.
3.
4.
Receiving multicast paging announcements
When a multicast paging announcement is received, it
is automatically played. By default, announcements are
played through the speaker.
Note
Multicast Paging Icons
.
Multicast paging icons indicate the status of pages and
the multicast paging groups registered to the unit.
On the Home screen, select
Press [ ] or [ ] to select the page group, and then
touch .
Start
Make the announcement.
To end the announcement, touch
•
To pause received announcements, go
on-hook, press [SP-PHONE], or touch
.
Pause
To start playing messages again, touch
.
Play
•
If Paging DND is enabled, all incoming pages
are rejected except for priority 1 pages.
Icon Description
Indicates an outgoing page.
Indicates an incoming page.
Indicates the paging group is idle.
Indicates the incoming page is paused.
.
.
Stop
Document Version 2014-11