Icon
Indicates the incoming page is being
played after being paused.
Document Version 2014-11
Description
Receiving Calls
This section explains the basic methods for receiving a
call.
Receiving a Call
1.
Go off-hook.
2.
To end the call, go on-hook.
Auto answer
You can have the unit automatically answer a received
call. The call is connected after a programmed number
of rings.
•
To enable Auto Answer:
On the Phone screen, touch
"Auto-answer is turned on" is displayed.
•
To disable Auto Answer:
On the Phone screen, touch
"Auto-answer is turned off" is displayed.
Note
•
When Auto Answer is enabled,
the line button it was enabled for.
Rejecting Calls
You can reject a received call at your unit or set the unit
to reject certain calls.
Rejecting receiving calls
1.
When receiving a call, touch
Rejecting anonymous calls
You can set the unit to reject calls when the unit
receives a call without a phone number.
To reject anonymous calls, the Block Anonymous Call
setting must be enabled through Web user interface
programming (Page 62). For details, consult your
administrator or dealer.
If the Block Anonymous Call setting is enabled through
Web user interface programming, you must configure
the unit to block anonymous calls.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Basic Call Features", and
then press [ENTER].
3.
Press [ ] or [ ] to select "Block Anonymous Call".
Feature Operations
.
AutoAns
.
AutoAns
appears on
.
Reject
.
Operating Instructions
23