Key Tone; Key Tone; Re-Registering The Handset - Panasonic KX-TG5055 Operating Instructions Manual

Special Features

Key Tone

You can select whether or not the handset keys will sound tones (key tone,
confirmation tone, error tone). The factory preset is ON.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Key tone" by pressing [d] or [B],
then press the soft key (
4
Select "Off" or "On" by pressing [d] or [B].
5
Press the soft key (

Re-registering the Handset

If "No link to base. Move closer to base and try again." is
displayed even when using the handset near the base unit, the handset may have
lost communication with the base unit. You need to re-register the handset to that
base unit.
• Have both the handset and base unit nearby during registration.
• Follow steps 1 and 2 listed below. You have about 1 minute to complete
them.
1
Base unit: Press and hold [LOCATOR] for 3 seconds.
• The CHARGE indicator flashes.
2
Handset: Press and hold [FLASH/CALL
WAIT] until "Handset Registering" is
displayed.
• After registration is complete, a long beep
sounds from the handset.
• If the handset beeps 3 times and "Error!!" is displayed, an error occurred. Try
again from step 1.
• You can stop registration by pressing [OFF] on the handset and pressing
[LOCATOR] on the base unit.
40
Handset
SELECT
), then press [OFF].
SAVE
).
SELECT
).
Handset & Base Unit
Initial setting

Key tone

Key tone
:On
SPIPRIVACY1
IN USE
Handset
Registering
SPIPRIVACY1
IN USE
Handset [1]
Registered