Display Contrast; Changing The Handset Name; Handset Key Tone; Handset Talking Caller Id - Panasonic KX-THA11 Operating Instructions Manual

Programmable Settings
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Time adjustment" i {SELECT}
3
Select the desired setting. (Default:
"Caller ID[auto]") i {SAVE}
i {OFF}

Changing the handset name

The handset can be given a customized
name ("Bob", "Kitchen", etc.), this is useful
when you have multiple units.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Device name" i {SELECT}
3
Enter the desired name (max. 10
characters; page 21). (Default:
"Handset")
4
{SAVE} i {OFF}
Handset voice enhancer
You can turn the voice enhancer feature on
or off for the handset.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Voice enhancer" i {SELECT}
3
Select the desired setting. (Default:
"Off") i {SAVE} i {OFF}

Handset Talking Caller ID

You can turn the Talking Caller ID feature
on or off for the handset.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Talking CallerID" i {SELECT}
3
Select the desired setting. (Default:
"On") i {SAVE} i {OFF}
34
For assistance, please visit http://www.panasonic.com/phonehelp

Display contrast

1
{MENU} (center of joystick) i h i
{SELECT}
2
"LCD contrast" i {SELECT}
3
Select the desired setting. (Default:
Level 3) i {SAVE} i {OFF}

Handset key tone

You can select whether or not key tones
are heard when keys are pressed. Key
tones include confirmation tones and error
tones.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Key tone" i {SELECT}
3
Select the desired setting. (Default:
"On") i {SAVE} i {OFF}
Handset auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
charger without pressing {C}.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Auto talk" i {SELECT}
3
Select the desired setting. (Default:
"Off") i {SAVE} i {OFF}
Note:
L If you subscribe to Caller ID service and
want to view the caller's information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
L If you set the line selection mode from
"Auto" to "Line1" or "Line2" (page 35),
the auto talk feature will function for that
line only. If the other line receives a call,
the auto talk feature will not function.