Camera Setting - Qvis MINI-PTZ-23X-H User Manual


AZIMUTH DISP: Displays the cameras current coordinates or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set

POSITION: Displays the angle between the benchmark and then current location. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.

ZOOM DISP: Display speed dome zoom speed or not. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃/F/Off.

Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

TITLE DISPLAY: Here you can set to display speed dome position information and etc. You can use the
speed dome control terminal to set the detailed title information. Please use the left/right button to set.

BACK: Go back to the previous menu.

EXIT: Log out system menu.

2.4.3 Camera Setting

Before the operation, please make sure your camera supports the corresponding function.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETTING
ZOOM SPEED
APERTURE
APERTURE RESTRAIN
NEXT PAGE
BACK
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.

WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go to
the third menu.

EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to the
third menu.

DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button, you can
go to the third menu. There are three options: auto/manual/off. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. Please make sure your product supports this function.

FOCUS SETTING: This is to set the camera focus mode, focus limit, etc. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.

FOCUS LIMIT: This is to set the distance between the camera and the object. It can prevent the focus
distance being too small, which may result in an unclear image. At the same time, you can change the
distance to change the focus speed.

ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.

APERTURE: This is to adjust the lens to achieve clearer video footage. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.

APERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in a
poorly illuminated environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
：8
：9
：10
EXIT
8